Schüco 75811, Operating And Maintenance Instructions Manual

Page: 44 / 100

Art.-Nr.75811/09.2010
GB Schüco 3
Pull the incoming air filter from the outer frame extensi -
on with the handles on the sides on the inside.
5. 8.2 Changing the incoming air filter
Warning
Switch off the device before changing the filter.
Warning: the fans continue to run.
Switch Schüco VentoTherm off.
Remove the cover from Schüco VentoTherm.
Pull out the IEC connector.
Unscrew the screw connection of the D-SUB plug and
remove it.
Undo the toggle-like fasteners and remove Schüco
VentoTherm.
1.
2.
3.
4.
. Maintenance and cleaning
Insert the new incoming air filter into the recess provi -
ded in the outer frame extension. Note that you must
push the incoming air filter in until it engages.
6.
Place Schüco VentoTherm in the device holder and fix
the toggle-like fasteners. Check that Schüco Vento-
Therm is in position and fixed securely.
7.