Schüco 75811, Operating And Maintenance Instructions Manual

Page: 34 / 100

Art.-Nr.75811/09.2010
GB Schüco 33
Schüco VentoTherm Comfort with LON interface
Schüco VentoTherm Comfort is equipped with 2-speed
ventilation. This design also features a CO
2
sensor and a
sensor to calculate air humidity. An automatic function
is also available, which switches the device to ventilation
speed 1, 2 or switches off in accordance with the sensors.
After disconnection from the mains (commissioning,
change of filter or power failure, etc.), the Comfort range
device will only run at speed 1 for the first 15 minutes.
The
device is also fitted with LON interface to integrate it into
the building automation.
Schüco VentoTherm Comfort with filter monitor
with LON interface
Schüco VentoTherm Comfort is equipped with 2-speed
ventilation. This design also features a CO
2
sensor and a
sensor to calculate air humidity, as well as a filter monitor.
The filter monitor reports when one or both filters are dirty
and need to be replaced. An automatic function is also
available, which switches the device to ventilation speed
1, 2 or switches off in accordance with the sensors. After
disconnection from the mains (commissioning, change of
filter or power failure, etc.), the Comfort range device will
only run at speed 1 for the first 15 minutes.
The device
is also fitted with LON interface to integrate it into the
building automation.
2. Proper use