06
1. Preparation.
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults
and any transport damage. Inspect the goods in the presence of your
forwarder. Should transport damage have occurred, please arrange for
an inventory (determination of the faults) to be made in the presence of
the forwarder. Please send a complaint in writing to the specialist dealer
responsible.
1.2 Safety measures prior to use
The correct use of the product requires detailed and thorough
instruction of the user or the accompanying person. We ask you to read
through the Instructions for use carefully prior to initial commissioning of
the product, and to observe them. It is possible that product parts that get
in contact with the skin may heat up in the sun. Depending on the duration
and intensity of solar radiation, the surfaces of individual parts can heat up
to over 41°C and thus lead to slight burns in the event of direct skin contact.
Therefore cover these areas or protect the device from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment, to prevent environmental
pollution and to improve the recycling of raw materials, please note the
disposal instructions in
points 1.3.1
and
1.3.2.
1.3.1 Packaging
The product packaging is used for protection during transport and should
be stored in case the product needs to be transported again. Should you
have to return the product for repairs or in case of a guarantee claim,
please if possible use the original box so that the product is optimally
packaged. Should you no longer require the packaging materials, sepa-
rate and recycle them.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.3.2 Product
At the end of the product life cycle, recycle the raw materials used in the product
according to their nature (see material information under
point 2.1
).