OPERATING INSTRUCTIONS
1
6
CG700 rondo
Version: 27202 -
D
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
4.13
Non-return air valve installation
4.14
Installation of the face plate assembly - general
fig. 23
28
Non-return air valve
29
Air line hose tail
56
Fixing bracket
Stick the air line hose tail (29) to the air
hose (L). Screw the non-return air valve
(28) onto the air line hose tail (29).
Fasten the non-return air valve with the
fixing bracket (56) to the pool wall or
similar. In the case of a ground level
overflow, place the non-return air valve in
the duct, see detail “B”.
Warning!
To position the non-return air valve also please observe the information under
chapter 4.2.
fig. 24
A
Hose coupling
B
Plug sleeve
D
Face plate assembly
21
Hose
Drain the pool water, if already filled, to
below the installation kit. Firmly place the
hose (21) with the hose coupling (A) onto
the plug sleeve (B) on the face plate
assembly (D). With that the air button is
connected to the switchgear cabinet.
8459
8231
