Schleuniger ACO 08, Operating Manual

Page: 42 / 52

Diagnosis / Troubleshooting
42 | 52 Operating Manual | Edition 1.00 (08-2020) | ACO 08
Error pattern Cause Possible measures
Wrong trigger time
Force bypass
Internal trigger
Wrong trigger time
Perform automatic
parametrization
Check or clean the tool/base
plate area
Perform automatic
parametrization
Machine is not released Wrong machine setup Load correct machine profile
or make appropriate settings
manually
Device does not start No voltage on the device Check connecting
cable/power supply, replace if
necessary
Device signal error with each
measurement
Tolerances no longer current;
wrong references
Check tool/machine for
changes or contamination;
generate new references