Schleuniger ACO 08, Operating Manual

Page: 22 / 52

General handling / operation
22 | 52 Operating Manual | Edition 1.00 (08-2020) | ACO 08
7 GENERAL HANDLING / OPERATION
7.1 GENERAL OPERATING INFORMATION
Notice
Personnel qualifications
The instructions listed in this chapter must be carried out by the operating
personnel
!
■
Before daily commissioning, a visual inspection of the device must be carried
out.
■
The safety cover of the machine must be closed during processing.
■
The internal process instructions must be followed in the machining process.
7.2 USER INTERFACE
The ACO 08 does not have any physical pushbuttons or switches. It is only operated via the graphic
user interface. The following principal inputs can be made:
■
Selection by tapping tiles or buttons
■
Return to the main menu or switching to page 2 of the main menu by swiping from the
right across the right edge of the display
■
Scrolling up/down by vertical swiping in the center of the display
■
Tab/category change by horizontal swiping in the center of the display
7.2.1 Main menu
The main menu has two pages. To change the page, swipe from the right across the right edge of
the display (requires user level 2 or 3).
Fig. 4: Setup p. 1
1 Monitoring mode 4 User selection
2 Teaching mode 5 Jobs
3 Setup 6 Device information
1
2 3
4
5
6