Schleuniger ACO 08, Operating Manual

Page: 28 / 52

General handling / operation
28 | 52 Operating Manual | Edition 1.00 (08-2020) | ACO 08
Categories
You may switch between categories by horizontal swiping in the center of the display or by directly
tapping the tab. Some categories require user level 3.
Category
Description Required user
level
CH1 Monitoring parameters for channel 1 2/3
CH2 Monitoring parameters for channel 2 (if used) 2/3
Trigger Settings for the start encoder 2/3
Crimp Settings for the crimp 2/3
IO Settings for the signals 3
Admin Device settings 3
Options
You may scroll up/down within a category by vertical swiping in the center of the display. The
option values can be modified by tapping the control elements. Some options required user
level 3. They are hidden when opening setup in user level 2.
Category CH1/CH2
Option Description Value
Observation start force Starting value of the crimp process evaluation 10-100 %
Observation end force End value of the crimp process evaluation 10-100 %
Envelope check Evaluation according to envelope on/off
Envelope upper limit Upper limit of the envelope (if active) 0-30 %
Envelope lower limit Lower limit of the envelope (if active) 0-30 %
Area check Evaluation according to area (work) on/off
Area upper limit Upper limit of the area tolerance (if active) 0-50 %
Area lower limit Lower limit of the area tolerance (if active) 0-50 %
Trouble check Additional fault limit to stop production in
the event of major errors
on/off
Trouble upper limit Upper fault limit (if active) 1-100 %
Trouble lower limit Lower fault limit (if active) 1-100 %
Drift compensation Compensation of gradual changes of the
crimping process (e.g. by fluctuations of the
terminal material or the room temperature)
on/off
Max drift Limit value of drift compensation. An error is
signaled if this value is exceeded.
1-100 %
Gain Boosting of the sensor signal 1/2/4/8/16/32 x