Schleuniger ACO 08, Operating Manual

Page: 34 / 52

General handling / operation
34 | 52 Operating Manual | Edition 1.00 (08-2020) | ACO 08
2. Assign a unique name by entry via the on-
screen keyboard and confirm with “Enter”.
3. Select “Yes” to load the default machine
settings. If you want to retain the existing
settings and possibly make changes to the
settings manually, then select “No”.
4. Mark the desired machine and confirm
with “select”.
5. Select “Yes” to automatically set the
corresponding parameters. Proceed as
described in the chapter
7.2.8 Automatic
parametrization
.
6. Generate a reference curve (see chapter
7.2.3 Teaching
).

The ACO 08 switches to the
monitoring mode
If you do not yet want to generate
a reference curve at this time, swipe from the
right edge of the display onto the display.

The ACO 08 switches to the main
menu.