Schiller BOB-CAT QUICKCAT 912480 Operator'S Manual Download Page 31

Page: 31 / 34

QUICKCAT

MOWERS

ADJUSTMENTS

PARKING BRAKE

NOTE:

There are 2 brakes, 1 on each transaxle.

The parking brake should keep the machine from

moving. To check the parking brake, park the ma-

chine on a level surface, open the bypass valves and

set the parking brake to

. Attempt to move the

machine forward and backward by pushing it. If the

machine moves, adjust the parking brake linkage as

follows:

1. Move the machine to a flat horizontal surface.

2. Move the parking brake handle to the OFF posi-

tion.

3. Insure that the brake links

are rotated toward

the rear of the machine. If not, remove cotter pin

from each brake link

and brake rod

. Slide

brake rod

out of each brake link

and Re-

insert rod

into each link

and secure with

cotter pin

4. Tighten brake nut

as needed. The length of

the threads protruding past the nut should mea-

sure 1/8" - 1/4".

5. Retest to insure the machine does not move.

Summary of Contents for BOB-CAT QUICKCAT 912480



































Search results

Summary of Contents for BOB-CAT QUICKCAT 912480

Reviews:

Related manuals for BOB-CAT QUICKCAT 912480

Brands by name

Popular brands

Schiller BOB-CAT QUICKCAT 912480, Operator'S Manual

Search results

Summary of Contents for BOB-CAT QUICKCAT 912480

Reviews:

Related manuals for BOB-CAT QUICKCAT 912480

Brands by name

Popular brands