35
DECK COUNTERBALANCE SPRINGS
The deck counter balance springs make it easier to
lift the deck and help it ride up over obstacles. If the
springs are over adjusted, the deck may bounce and
produce an uneven cut.
To adjust:
1. Raise the cutterdeck all the way and latch it in
transport position.
2. Adjust the spring
A
with nut
B
:
The standard adjustment of thread beyond the
adjustment nut
B
is 1" for 48" and 52" decks and
1-3/4" for 61" and 72" decks. The nut may be
run onto the eyebolt more or less than indicated
according to preference.
FRONT DECK LIP
Cutterdecks have adjustable front lips to accommo-
date various conditions.
To adjust per conditions:
1. Loosen the front bolts
S
.
2. Adjust height of
H
.
3. Retighten
S
once you have desired height.
DAMPERS
Dampers are proveded on the traction controls; one
for each side to make it easier to operate the ma-
chine smoothly. There are three mounting positions
for each damper.
Center position:
Standard
Outer Position:
Increase the damping and make traction controls
stiffer to operate.
Inner Position:
Decrease the damping and make the controls lighter
to operate.
ADJUSTMENTS
Summary of Contents for 9995010
