automatic cable rewinder FT 038 e-mobility with integrated charging electronic
installation and operating instruction FT 038.XXXX.I1X
installation
and operation instruction FT 038 e-mobility miL FT 038_XXXX
_I1X - A4
Seite 6
09.11.2022
Schill GmbH & Co. KG; Bruckstraße 44; 70734 Fellbach
CABLE STOPPER
The length of the available cable can
be individually adjusted with the
provided cable stopper. The reliable
clamping adapts to various cable
diameters between 6 and 16 mm. For
a thicker cable, a larger version is
available. The stopper also serves as
a safeguard against a full unload of the
spring if the cable is unintentional
released. It should therefore never be
removed.
ROLLER GUIDE
Fitted with four rollers, the roller guide ensures that the cable is
correctly guided. It can be operated in a fixed or flexible mode.
The roller guide adjusts then to the direction of the pull. The guide
ensures that the cable is always guided onto the reel and
prevents it from sliding of the drum.
LOCKING DEVICE
As a standard feature the cable reel has a
disengageable cable locking device. The
latching mechanism ensures that the pulled-out
cable stays without traction fixed in place.
When the cable is being pulled out, the spring
detent passes over a series of grooves. An
audible click indicates that the locking device is
engaged. If you gently rewind the cable after
the clicking sound, you will notice that the
spring detent will engage into the notches,
locking the cable in position. The cable can be
disengaged by gently continuing to pull the
cable until the click can no longer be heard.
The loaded spring will pull the cable back onto the reel.
The locking device can be disengaged by pulling the knurled grip out by approx. 1cm and
turning it between 90°and180°. This will disengage the locking device the cable is then
constantly under tension.
