Page 1 of 4
Installation Instructions
Assembly Name MiX interface cable
Assembly P/N N/A
–
prototype only
Revision History
#
Date
Name
Change Description
1
10 Mar 2017
Jess Benning
First release
Parts
Part
Image
5m USB to RS232 Cable
Page 1: ...stallation Instructions Assembly Name MiX interface cable Assembly P N N A prototype only Revision History Date Name Change Description 1 10 Mar 2017 Jess Benning First release Parts Part Image 5m USB to RS232 Cable ...
Page 2: ...Page 2 of 4 USB clamp maintenance cover Cable Tie ...
Page 3: ...Page 3 of 4 Assembly Steps Step Details Step Image 1 Remove existing maintenance panel using a T6 torx screwdriver 2 Plug in USB end of the USB to RS232 cable ...
Page 4: ... screws Ensure the connector mould is fitted into the slotted end of the cover 5 Apply cable tie tighten and cut Ensure the cable tie is on the cover side of the barb 6 Connect to the existing MiX serial cable DB9 connector S3 and tighten the screws 7 Assembly complete ...
