Schill FT 038 Installation And Operating Instruction Download Page 15

Page: 15 / 18

automatic cable rewinder FT 038 e-mobility with integrated charging electronic

installation and operating instruction FT 038.XXXX.I1X

installation

and operation instruction FT 038 e-mobility miL FT 038_XXXX

_I1X - A4

Seite 15

09.11.2022

Schill GmbH & Co. KG; Bruckstraße 44; 70734 Fellbach

www.schill.de

Mounting fixture WB 038 for wall installation

Ceiling installation rotating DB 038

Mounting fixture WB 038 is included in
the scope of supply, but no fastening
screws.

Mounting fixture DB 038 and fastening
screws are

not

in the scope of supply

Ceiling and floor month with DB038

The extension cable swivels on a 360° axis. The
swivel roller guide is to be adjusted to the cable
extension direction and secured (screw
connection) in this position.

ATTENTION

If repeated over-tightening, the connection
cable can be mechanically stressed and torn
off.

Summary of Contents for FT 038



















Search results

Summary of Contents for FT 038

Reviews:

Related manuals for FT 038

Brands by name

Popular brands

Schill FT 038, Installation And Operating Instruction

Search results

Summary of Contents for FT 038

Reviews:

Related manuals for FT 038

Brands by name

Popular brands