automatic cable rewinder FT 038 e-mobility with integrated charging electronic
installation and operating instruction FT 038.XXXX.I1X
installation
and operation instruction FT 038 e-mobility miL FT 038_XXXX
_I1X - A4
Seite 14
09.11.2022
Schill GmbH & Co. KG; Bruckstraße 44; 70734 Fellbach
delivery. Specification for plug-in devices can be found within the relevant standard DIN
EN 60390 or respectively DIN VDE 0620.
For other operating temperatures please
contact us.
Additional information with respect to cable types, spring tensions, power loads and
weights can be found on the product rating plate, in our current product catalogue and also
on our website
The dimensions, weights, lengths, coloures and traction are subject to modifications.
We
cannot rule out discrepancies and we reserve the right to make technical changes to the
product without giving advance notice.
INSTALLATION HEIGHT
The installation height of the cable rewinder is not limited. The maximum extension length
is the specified cable length. The standard cables are designed to withstand the weight of
the extended cable included cable stopper. Additional tensile forces (cause by additional
weights for example) are not permitted.
When the cable is pull-out horizontally due to the weight of cable a slack occurs. This is
about 10% of the cable pull-out length.
FITTING INSTRUCTION
Wall installation with universal holder WB038
The cable reel can be rotated 150°.
Depending on the mounting height, the rotatable roller guide can be adjusted to the cable
pull direction and fixed.
