Kit
Cable Size Range
Cable Insulation
Lug Cover*
Maximum
Number
AWG/kcmil (mm
2
)
O.D. Range
I.D.
Bolt Length
Feeder
Motor Lead
in. (mm)
in. (mm)
in. (mm)
5302
2 - 1/0
4 - 1/0
0.34 - 0.54
0.95
3/4
(35 -60)
(25 - 50)
(9 - 14)
(24)
(19)
5303
1/0 - 250
2 - 250
0.40 - 0.80
1.20
1-1/4
(70 - 120)
(35 - 120)
(10 - 20)
(30)
(32)
5304
250 - 500
4/0 - 500
0.67 - 1.05
1.70
1-1/2
(150 - 240)
(120 - 240)
(17 - 27)
(43)
(38)
Motor Lead Pigtail Splice
for 1000 volts (or less) cables with
one-hole lugs
For two-hole lug connections, use 3M
™
Motor Lead Pigtail Splice Kits
5316 thru 5319
Instructions
Kit Contents (kit contains 3 splices):
3 Lug Covers
3 Locking Pins
3 Tubes Silicone Grease
3 Mastic Sealing Strips
Kit Selection Table
Table 1
* Lug cover I.D. - use when calculating kit sizing for a connection of more than two conductors (e.g. 3-way, 4-way, etc. Use of one-hole stacking
lugs is recommended.)
3M
™
Motor Lead
Pigtail Splice Kits
for 1000 Volts (or less)
5302, 5303, 5304
78-8126-5500-5-C
Technical Information:
For use on Non-Shielded Cables 1000 Volts
(or less) with one-hole lugs.
Cable Size Range:
Feeder: 2 AWG-500 kcmil
Motor Lead: 4 AWG-500 kcmil
Copper Conductors
Caution
Working around energized systems may cause serious
injury or death. Installation should be performed by
personnel familiar with good safety practice in handling
electrical equipment. De-energize and ground all
electrical systems before installing product.
CSA Certified for
600V or Less
