Appendix A
Splice Removal
1. Remove Locking Pin from Lug Cover.
2. Slide Lug Cover off of lugged or split-bolt connection.
3. If splice was sealed for moisture resistance: Remove
Mastic and Vinyl Tape Seal from cables.
4. Remove nut and bolt (or split-bolt) to separate the
motor lead from the feeder cable(s).
Caution
Be careful not to damage cables.
Appendix B
Splice Reusability
1. First inspect the removed Lug Cover and Locking
Pin for damage or wear. Replace with a new splice if
evidence of damage or wear is found.
2. Obtain material to replace the non-reusable splice
components.
3. Re-Install the splice according to the standard kit
instructions.
Reusable Components
• Lug Cover
• Locking Pin
Replacement Components
These are standard 3M products, available from 3M
Electrical Markets Division.
• 3M
™
Scotch-Seal
™
Mastic Strip 2230
(UPC 054007-41813), 5/8" x 6", 40/case
• SIL-5cc Silicone Grease (UPC 054007-41814),
5-cc-Tube
• Scotch
®
Super 33+
™
Vinyl Electrical Tape
(UPC 054007-06132), 3/4" x 66'
• 3M
Pin-Lug Cover, 2” Lg.
(78-8041-7208-4, special order)
3M, Scotchlok, Super 33+ and Scotch-Seal are trademarks of 3M Company.
Scotch is a registered trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or complete-
ness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your
purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
. If this product is defective within
the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product,
regardless of the legal theory asserted.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800-245-3573
Fax 800-245-0329
www.3M.com/electrical
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
78-8126-5500-5-C
