Seite:14
Technical information
HS 720
Construction measurements:
Total length
mm
1270
Total width
mm
730
Total height
mm
1130
Rocker support
mm
670
Saw blade Ø
max. mm
700
Idle - Motor
1/min.
1400
Cutting speed- Saw blade m/sec.
52
Weight
kg
81,5
Power unit:
Motor
V
380-420 / 50Hz
Input power P1
KW
5,2
Output power P2
KW
3,58
Motor speed
1/min.
1400
Operating mode
S6/40%
Rated current
A
10
Work information
Cutting height
Spar
max. mm 240
min. mm 60
Turning cut
max. mm 250
Piece of wood
max. mm 380x240
Specific noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2
from EN 31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts
under the foundations of ISO 7904 supplement A performed working conditions to:
Sound pressure level in dB
Idle LWA / Processing LWA
dB(A)
105 / 107
105 / 107
105 / 107
Sound pressure level on working site in dB
Idle LpAeq / Processing LpAeq
dB(A)
85 / 92
95 / 97
95 / 97
95 / 97
The specified values are emission values and therefore should not at the same time be reliable working site values. Although
there is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions need to be
taken or not. Factors, which influence the actual availabe immusion value on working site, include the peculiarities of wor-
king area, other sources of noise, e.g. the number of machines and other adjoining processes. The allowed working values
could vary from country to country. However, the information should qualify the user, to be able to make an estimation of the
dangers and risks.
Assembly
The machine is delivered, except for the handle bar, completely assembled and is therefore immediately ready to operate.
Demount the handle bar from the rocker joint and insert it into the left frame side wall.
Setting-up and adjustment
Please pay attention that your rocker circular saw is set up stable and on a leveled floor.
