Seite:18
Implementation
• Please read the safety instructions before implementation.
• All protection and additional facilities should be fitted.
• The saw is exclusively constructed to cross cut firewood with a maximum length of 1 meter.
• Independent of the wood diameter only one piece should be laid on the rocker.
• Hold the wood with the left hand and use the rocker with the right hand.
Maintenance
•Modifying as well as adjusting, measuring and
cleaning to be carried out only when motor is swit-
ched off. Pull out power plug!
Exchange of saw blade
• The exchange of the saw blade can only be under
-
taken in firewood cut position.
• Open side lid.
• Put the locking pen (1) through the bottom saw
blade
protection to lock the saw blade.
• Loosen the saw blade with the supplied open-end
wrench
/ female six fold wrench (2).
TROUBLESHOOTING
To repair disfunctiones switch off the machine. Pull out power supply.
Cause
Remedy
Upon switching off the saw does not slow down.
Brake
board
defect
Renew
brake
board
Electrotechnical maintenance works should only be carried out by an electronics technician!
On removal of the machine the local legal regulations have to be abided by.
Only for EU countries.
Do not dispose of electric tools together with household waste ma-
terial!
In observance of european directive 2002/96/EC on wasted electri-
cal and electronic eqipment and its implementation in accordance
with national law, electric tools that have reached the end of their
life must be collected separately and returned to an environmentally
compatible recycling facility.
1
2
