international 17
the instructions given in the chapter „Maintenance“
of this manual.
Wear safety gears including goggles or a screen, ear pro-
s
tection, breathing mask and protective clothing.
After connection to the mains and switching on, the
s
machine starts automatically.
Air escaping from the compressor may not be inhaled.
s
Check the pressure control valve daily before starting
s
work.
Drain humidity from the tank. Avoid tank corrosion.
s
Cut off the mains supply, remove the power supply
s
plug, and relieve the pressure before starting mainte-
nance work.
Wear goggles.
Wear ear protection.
Wear a breathing mask.
Never direct the output air from the compressor towards
a part of the body or a person. Never try to block the air
escape with your finger or a part of your body.
D
Use as authorized
The machine meets all valid EC machine guidelines.
The machine must only be used in technically perfect
s
condition and conscious of the risks, in accordance
with its designated use and the instructions set out in
the operating manual.
Any functional disorders, especially those affecting the
s
safety of the machine, must be rectified immediately.
The safety, working and maintenance instructions of
s
the manufacturer as well as the dimensions given in the
chapter „Technical data“ must be adhered to.
The relevant accident prevention regulations and other,
s
generally recognized safety-technical rules must also
be adhered to.
The machine may only be used, maintained, and oper-
s
ated by persons familiar with it and instructed in its
operation and procedures.
Arbitrary alterations to the machine release the manu-
s
facturer from all responsibility for any resulting dam-
ages.
The machine may only be used with original accesso-
s
ries and original tools supplied by the manufacturer.
Any other use exceeds authorization. The manufacturer
is not responsible for any damages resulting from un-
authorized use; risk is the sole responsibility of the
operator.
Summary of Contents for SPECIAL EDITION HC16
Page 83: ...international 83...
