Scheppach 5912311903, Translation From The Original Instruction Manual

Page: 21 / 184

www.scheppach.com
GB | 21
2. Device description (Fig. 1)
1. Recoil starter
2. Fuel tank cap
3. Clutch handle
4. Handle
5. Lock clutch lever
6. Handlebar mount
7. Fuel tank
8. Fuel pipe
9. Blade guard
9.1 Blade guard extension
10. Depth stop
11. Blades
11.1 Blade extension
12. Protective cover of the muffler
13. Spring
14. Oil drain plug
15. Oil dipstick
16. Accelerator
17. Wheel
18. Fuel drain plug
19. Carburetor
20. Muffler
21. Air filter cap
22. Air filter
3. Scope of delivery (Fig. 2 + 3)
• Motorised cultivator MTP560 (G) (1x)
• Spark plug socket (H) (1x)
• Depth stop (10) (1x)
• Hardware bag (L)
• Handlebars (M) (2x)
• Operator‘s manual
• Blade guard extension (2x) (9.1)
• Blade extension (2x) (11.1)
• Open the packaging and remove the device care -
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans -
port damage. When complaints the dealer must be
informed immediately. Subsequent complaints will
not be accepted.
• If possible, store the packaging until the warranty
period has expired.
• Read the operating instructions to make yourself
familiar with the device prior to using it.
• Only use original parts for accessories as well as
for wearing and spare parts. Spare parts are avail -
able from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
1. Introduction
Manufaturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
Read through the complete text in the operating in -
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat -
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re -
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu -
lations that apply for the operation of the machine in
your country. Keep the operating instructions pack -
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before op-
erating the machine and carefully follow its informa -
tion. The machine can only be operated by persons
who were instructed concerning the operation of the
machine and who are informed about the associat -
ed dangers. The minimum age requirement must be
complied with.
In addition to the safety notices contained in this
operating manual and the particular instructions for
your country, the generally recognised technical reg -
ulations for the operation of identical devices must
be complied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.