EN
43
2)
Taking into consideration height of the
installation site, drill holes Ø6 mm on the
Wall by using a drilling machine (
E,F
) for
interior flue connection sheet and insert
plastic wall plugs Ø6 mm into these holes.
3)
Tighten 2 of 4,8x50 YSB screws in to the
wall plugs at the points
A
and
B
. Make sure
there is a clearance of 5 mm between the
screw head and wall.
4)
Fix the interior flea connection sheet into
the wall plugs Ø6 mm at the points
E
and
F
by using the screws 3,9x22 RYSB.
5)
Hang the hood by engaging it with
the screws through the suspension
holes at
A
and
B
where there is a 5-
mm clearance of between the screw
heads and wall.
(Figure 5)
6)
Open the glass cover of the hook
by pulling it towards yourself and
remove the aluminum cartridge
filter. And, fix the product by
tightening other screws 4,8x50 YSB
into the plastic wall plugs in the
holes
C
and
D
visible from the inner
part of the product.
(Figure 5)