EN
44
Prior to connecting the hood with the pipe, you should control the plastic flaps
at the product air exit point. Before making the pipe connection, operate the hood and
make sure the flaps move upwards correctly and allow air exit. Otherwise, change
direction of the flaps.
(Figure 8)
Overtightening of the cable holder or clamp when making pipe connection may
prevent operation of the flaps. Prior to connecting the pipe with the chimney of your
house, you, therefore, control whether the hood operates properly by operating it.
(Figure 6)
7)
Connect the hood with the
aluminum pipe. Pass the flexible
aluminum pipe into the plastic flue
and fix it by using the plastic cable
holder or clamp without
overtightening. Insert other end of
the pipe into the flue hole on the
wall. (
Figures 6-7
)
(Figure 7)