Figure 3
Figure 4
Figure 5
Figure 6
TX
RX
Porte 300
2.3.1
Electromechanical geared motors
The swing gate operators consist of a 24 V DC motor and a
worm gear. The motors are attached to the gate and pillar
with front and rear brackets. The manual release keys are
required for manual unlocking.
2.3.2 Control Box
The control box consists of a motherboard, a radio receiver and
a transformer. With the help of the control, all functions of the
swing gate operator are configurable. Furthermore, there are
terminals on the motherboard for connecting various
accessories.
2.3.3
Photocell
The photocell is mounted on a exteriorly on a flat surface and
connected to the control box by cables. The transmitter and
receiver visually detect obstacles and automatically reverse the
swing gate if the beam is broken.
2.3.4
Remote contol
Press button "A" to open both wings.
Press key "B" to open one wing (pedestrian pass-through).
Manual release keys
A B
6
