Figure 25
Figure 26
Figure 27
Figure 28
Figure 31
Figure 32
Figure 30
Figure 29
12) Lift the motor and insert the screw into the front motor mount.
13) Remove the motor cover, loosen the screw and remove the bolt. See Figure 25. Now lift the rear of the motor
and move the gate until the motor can be locked to the rear bracket as shown in Figure 26. Slide the bolt through
the hole provided in the motor and through the rear bracket. Tighten the screw for the bolt. See Figure 27.
14) Tighten the bolt with the nut on the rear bracket, then loosen the nut half a turn to allow the motor arm to
rotate.
15) Now tighten the screw with the nut on the front bracket. Tighten this screw completely.
16)
Now connect the motor cables. See Figure 29.
17) Close the motor cover again and tighten the cover screws.
1
1
2
2
3
3
B
A
Positive
(+)
Negative
(-)
Motor
18)
Manual unlocking of the motor:
19) Turn the round disc on the motor towards "Open". See Figure 31.
20) Slide the cover unlocking forward. See Figure 32.
21) Use the manual release key and turn the release counterclockwise until it stops.
Figure 33
12