2019/10/07
Operating manual/BEAROMOS 2020/Version 1.0
Page 6 of 26
1
Safety information/safety instructions
To operate the device safely and correctly, the device must be properly transported and stored,
correctly installed and put into operation and must be operated as intended.
Only persons who are familiar with installation, commissioning and operation and have the appropriate
qualifications for their task may work on the device. You must observe the contents of the operating
manual, the information on the device and the relevant safety regulations for the installation and
operation of electrical equipment.
The devices are built and tested in accordance with DIN EN 60947 and leave the factory in a technically
safe condition. In order to maintain this condition, you must observe the safety instructions that are
indicated by
“
Warning
”
in the operating manual. Failure to observe the safety instructions may result in
death, personal injury or damage to the device itself and to other devices and equipment.
If the information contained in the operating manual is not sufficient in a given case, please contact
us
directly or your representative.
You must observe the applicable regulations that apply in the country of use when using the device, if
the industrial standards and regulations stated in this operating manual and valid in Europe do not apply.
Warning!
The components may heat up during operation.
