Schaller Automation BEAROMOS 2020 Operating Manua Download Page 24

Page: 24 / 26

2019/10/07

Operating manual/BEAROMOS 2020/Version 1.0

Page 24 of 26

Disposal

Please return defective devices or devices that no longer required to us for proper disposal.

Part numbers

Material

Description

153150

BEAROMOS 2020 sensor, clockwise rotation - with internal socket

153160

BEAROMOS 2020 sensor, anti-clockwise rotation - with internal socket

153170

BEAROMOS 2020 sensor, clockwise rotation - without internal socket

153180

BEAROMOS 2020, anticlockwise rotation - without internal socket

Spare parts catalogue

Material

Description

Content

290047

Spare parts for the
BEAROMOS 2020, clockwise
rotation

Sensor housing including x2 supporting tube seals & cover
seals

290049

Spare parts for the
BEAROMOS 2020, anti-
clockwise rotation

Sensor housing including x2 supporting tube seals & cover
seals

290048

Maintenance kit for O-rings

x2 supporting tube seals & cover seals

Table 1: Spare parts

Summary of Contents for BEAROMOS 2020



























Search results

Summary of Contents for BEAROMOS 2020

Reviews:

Related manuals for BEAROMOS 2020

Brands by name

Popular brands

Schaller Automation BEAROMOS 2020, Operating Manua

Search results

Summary of Contents for BEAROMOS 2020

Reviews:

Related manuals for BEAROMOS 2020

Brands by name

Popular brands