Installation, Mounting and Maintenance DISA-B
Z11/36 - 6
Construction subject to change.
No return possible!
09.05.2014
Version:
Installation
The floor induction diffuser type Maintenance DISA-B is partic-
ularly suitable for horizontal installation in false floors. The de-
vices must not be installed in places with extreme moisture (e.g.
laundries or swimming pools), aggressive media, with high dust
formation, outdoors or in places subject to explosion hazards.
For correct installation, the following instructions must be fol-
lowed:
Mounting
The device is fastened to the floor by means of adjusting legs
and levelled (1).
During mounting the end of the register pipes must be sealed to
protect them from dust and dirt.
Once the device has been aligned on the floor, it can be fixed to
the floor by means of the delivered mounting plates (2) and fas-
tening elements approved by the building supervisory authori-
ties and adjusted in height later on.
Hydraulic connections
- Make sure that places that are intended as openings for air
admission and air discharge are free of pipes, electric cables,
crossbeams, stands, etc.
- Install the unit at a site that has good air quality.
- Make sure that the floor or false floor correspond to the
weight of the device and also allow correct mounting of the
fastening elements.
- The installation site must have sufficient space and the nec-
essary resources for carrying out mounting and maintenance
activities of all device components. Make sure that the valves
are easily accessible.
(1)
33
33
275
For the installation of the device, use adequate tools,
devices and materials and observe the safety regula-
tions and other current regulations.
SCHAKO cannot be held liable for damage resulting
from faulty installation or the use of unsuitable fas-
tening devices.
1
2
44
91
187
234
98
125
44
234
125
28
75
171
218
98 125
28
218
125
Heating
Cooling
DISA-B-HT-...-WS1 / -WS3
(4-pipe)
DISA-B-H...-WS1 / -WS3
(2-pipe)
DISA-B-HT-...-WS2 / -WS4
(4-pipe)
DISA-B-H...-WS2 / - WS4
(2-pipe)
Heating
Cooling
