background image

Installation, Mounting and Maintenance DISA-B

Z11/36 - 3

Construction subject to change.

No return possible!

09.05.2014

Version:

Safety instructions

Prior to installation and commissioning of this device, please

read completely through this manual. Please observe in partic-

ular the regulations and operating instructions  containing the

hazard symbols and safety signs. Non-observance can result

both in damage to the device and personal injuries.

If, after reading through the manual, you have further questions,

please contact the manufacturer or the local sales office.

General information

SCHAKO shall not give any warranty for damage resulting from:

Warranty

The device warranty will be for two years starting from the

handover date and shall apply to all production faults. Electric

components are excluded from the device warranty. However,

they are covered by the corresponding warranty of the relevant

manufacturer

Also excluded from the warranty is damage to the device unit

caused by components that are not part of the device itself.

The warranty only covers the return and replacement of defec-

tive materials.

Recycling

- The inspection, installation, hydraulic connection and com-

missioning of the device must be carried out by qualified

skilled personnel only in compliance with the current regula-

tions.

- Electric and hydraulic connections and their correct function-

ing are the responsibility of the installer.

- Do not change any control or safety elements without prior

approval by the manufacturer or the local sales office.

- Improper use caused by ignoring the instructions given in

this manual

- Non-observance of the operating conditions of the device.
- Installation and maintenance by personnel without proper

qualification.

- Improper use of the device or operation under conditions not

conforming to the manual.

- Use of spare parts that are not original spare parts.

It is recommended recycling the components of

the device at the end of the device service life as

completely as possible or use them for a different

purpose. Components that cannot be recycled

must be properly disposed of by an authorized dis-

posal company in accordance with current legal

regulations.

It is recommended keeping this manual at a safe lo-

cation after installation and use it for future mainte-

nance activities.

Hazard warning

Important information

Safety information

Recycling

Summary of Contents for DISA-B












Reviews: