Scarlett SC-SI30T01, Instruction Manual

Page: 5 / 23

IM013
www.scarlett.ru SC-SI30T01 5
•
The water tank should be emptied after each use.
SPRAYING
•
As long as there is enough water in the water tank, you may use the spray button at any temperature setting
during steam or dry ironing.
•
Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING
•
Set the temperature control dial to the “••“ or “•••” position.
•
Press the steaming button.
CAUTION:
Avoid coming in contact with ejected steam.
DRY IRONING
•
The steam iron can be used on the dry setting with or without water in the water tank, however it is best to avoid
having the water tank full while dry ironing.
•
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it with water
until the steam iron cools down.
VOLTAGE SELECTOR
•
This iron has a function of voltage selection. This function is necessary for travel iron, because different countries
have different voltages in the power supply. To select the correct voltage, set the selector to 115 or 230 V
CARE AND CLEANING
•
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
•
Do not use abrasive cleaners.
WATER TANK CLEANING
•
Fill the half of the water reservoir.
•
Set the temperature control to its maximum position.
• Insert the main plug into the wall socket.
•
Allow the iron to heat up until the indicator light goes out.
•
Unplug the steam iron.
•
Holding the iron horizontally over the sink, change the steam control to the maximum position.
• Boiling water and steam will be ejected from the holes in soleplate with Impurities washed out.
•
Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate will be dry during storage.
STORAGE
•
Unplug the appliance from the power supply, empty the water tank (do it after each use) and allow the steam iron
to cool down completely.
•
Wrap the cord around the heel rest.
•
To protect the soleplate, place the steam iron in an upright position on its heel rest.
RUS
•
. ,
.
• , ,
, .
• . .
• .
• , .
• , .
• , ,
.
• ,
. , ,
.
• , ,
, .
• ( ) ,
,
,
.
• .
• , .
• .
.
•
:
,
.