Scarlett SC-HC63C66, Instruction Manual

Page: 4 / 20

IM020
www.scarlett.ru SC-HC63C66 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read this instruction manual carefully before use and keep in a safe place for future reference.

Before switching on the appliance for the first time please check if the technical specifications indicated
on the unit correspond to the mains parameters.

For home use only. Do not use for industrial purposes. Do not use the appliance for any other
purposes than described in this instruction manual.

Do not use outdoors.

Always unplug the appliance from the power supply before cleaning and when not in use.

To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.

Do not take this product to a bathroom or use near water.

The appliance is not intended for use for physically, sensory or mental disabled person (including
children) or for person with lack of life experience or knowledge, if only they are under supervision or
have been instructed about the use of the unit by responsible person.

Children must be under control in order not to be allowed to play with the appliance.Do not leave the
appliance switched on when not in use.

Do not use other attachments than those supplied.

Do not operate after malfunction or cord damage.

In case of power cord is damaged, its replacement should be done by the manufacture or service
department or the other high-skill person to avoid any danger.

Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.

Keep the cord away from sharp edges and hot surfaces.

Do not place or store the appliance where it can fall or be pulled into a tub or sink.

Do not pull, twist, or wrap the power cord around the appliance.

Never insert any objects into openings in the appliance housing.

Do not put operating appliance on any surface, it may cause injury or damage.

Do not use the appliance with damaged comb, or with teeth missing from the blades as injury may
occur.
 If the product has been exposed to temperatures below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.

NOTE: KEEP THE BLADES OILED.

The appliance should be used only with the power supply supplied with the appliance.

The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.

Do not use the hair clipper when the skin is infected.

Do not use the hair clipper on animals.

The manufacturer reserves the right to introduce minor changes into the product design without prior
notice, unless such changes influence significantly the product safety, performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents
in the following format XX.XXXX where first two figures XX is the month of production, and following
four figures XXXX is the year of production.
PREPARATION

Before first use cutting blades of the machine should be thoroughly lubricated.

Before switching the unit on for the first time, please fully discharge and recharge the battery.

The charging time is 8 hours.

The fully charged battery ensures 45 minutes of operation.

Recharge the battery at least once in 6 months, even if the clipper is not in use.

To charge the battery, switch off the clipper and connect its power cord to mains. The indicator lamp
lights.

When the battery has charged, disconnect the clipper from mains. The clipper is ready for operation.
OPERATION

You may operate the clipper, when its battery is charged, or if it is connected to the mains.

Take one of the supplied combs, insert the comb guides into the matching slots and gently push until it
clicks.

Turn the length of the hair cutting at the rear of the machine, set the desired length.Turn the knob until
the desired length is the figure does not coincide with the mark on the housing.

To turn on the machine, slide the switch up.

When finished, turn off the machine by moving the switch down.

You may also use the clipper without any comb attached.
THINNING FUNCTION

The blade allows you to use thinning function and improve quality of cutting.