Scarab M65T Operating Instructions
Part No. SCAZ043468 1.6.01
34
E&OE
Engine Access
To access the engine the hopper needs to be raised, see page 23. Use of the access steps and grab handle is recommended.
The engine bay work light is operated by the green switch
(
1
)
on the side of the electrical/pneumatic cabinet. When pressed it starts
a timer for 30 minutes and then switches off. Pressing the button again restarts the timer. This light works independent of the
ignition circuit.
Failure to comply with the following could result in serious injury.
Never work under a raised hopper without the hopper safety prop being deployed.
When mounting the chassis always use the access steps and tread plates. Ensure they are free from contamination that may
cause them to become slippery. Always wear suitable footwear with clean and dry soles.
Wear appropriate personnel protective equipment (PPE).
Ensure that the machine is on a flat and level surface with the auxiliary engine stopped for a suitable period, to allow the oil
to return to the sump and cool sufficiently.
Engine Oil
To check the engine oil proceed as follows:
1. To access the engine the hopper needs to be raised, see instructions on page 23.
2. Remove the dipstick
(
2
)
from the holder.
3. Wipe clean with a lint free cloth.
4. Replace in holder. Remove again and check the oil level.
The oil level should never fall below the minimum level or exceed the maximum level
as shown by the gauge on the bottom of the dipstick. The oil level should be within the
chequered indented area of the dipstick
(
3
)
.
5. If extra oil needs to be added then remove the filler cap
(
4
)
next to the oil filter and
dipstick or remove filler cap
(
5
)
on top of engine and pour fresh oil through the opening.
Remember to allow time for the oil added to drain into the sump before rechecking the
oil level again.
Repeat until correct level is obtained.
6. Replace filler cap and dipstick.
Engine Oil: 15w/40.
1
2
2
3
4
5
Summary of Contents for M65T
