Scarab M65T, Operating And Basic Maintenance Instructions

Page: 18 / 58

Scarab M65T Operating Instructions
Part No. SCAZ043468 1.6.01 18 E&OE
The LCD Monitor
The sweeping monitor displays information on the current status of the sweeper while it is in sweep mode, by indicating which items of equipment are active,
plus other relevant information i.e. fluid levels, fan speed and temperatures, it also alerts the user to any warnings by means of appropriate flashing symbols
and, when appropriate, a warning buzzer. For warnings identified by , stop and investigate the cause. The accompanying illustration shows the range of
information/alert symbols that can be displayed, however it should be noted that warning symbols ( * ) only illuminate when a specific condition occurs.
If any of the following DEUTZ engine faults occur the will flash and the warning buzzer will pulse, stop and investigate the cause.
Low engine coolant, air filter blocked, water in fuel, engine protection lamp (amber), engine stop lamp (red), oil pressure and high coolant temperature.
0 50 100
00.00 0
+
!
NODE Software Error !
+44 1622 831006 i
Option Option
Time
Engine speed
Low water level *
(Dust suppression)
Hopper raised *
Fault active *
Assign mode *
Service reminder *
Hydraulic oil
Temperature warning *
Low hydraulic oil level *
(Takes priority)
Central brush (wide sweep)
pressure down
Flashes across screen when
node software is incompatible
High pressure water
ON No water
Suction Fan
ON Boost OFF
Fuel gauge
DPF ash filter. *
Regen required
(Stage V only)
EAT fault (Stage V only) *
(Exhaust After Treatment)