Scantool PV 35, Manual

Page: 8 / 26

8
3.0 PV 35 TECHNICAL PROPERTIES
As a superior model in its own class the PV 35 is equipped with a powerful double speed motor and a
low noise reduction gearbox, which gives the machine power to bend with ease. The digital Read Out
(optional) that can be fitted to top roll gives higher accuracy and helps increase the efficiency. By
using Mobile Control Panel that includes foot pedal and an emergency stop you can easily and safely
bend the required materials. General Technical Information of PV 35 is given below.
STANDART SPECIFICATIONS
SAFETY UNITS
Steel Frame
Emergency Button on Mobile
Two rollers are powered Control Panel
Rolls are hardened Various DANGER signs around the
Rolls Shafts are Special Steel material machine.
hardened and grinded Brake motor (Optional)
Standard Rolls Overload Circuit - Breaker
Foot Pedal control
Guide Rolls
Horizontal and Vertical Working Position
User’s manual book
SPECIAL FEATURES
Pipe / Tube Bending Rolls
Profile Bending Rolls
Angle Bending Rolls
Digital Read Out
Special Lateral Angle Guides.
Double-Speed Motor
Note: Due to various safety regulations, the specifications presented here can change from couniry to
country without prior notice. Above dimensions and other characteristics can also change without prior
notice due to our constant improvements on our products.
MODEL: PV 35
Shaft Diameters

mm
50
Roll Diameters

mm
155
Working Speed M/min 4,5
Motor Power kW 1,5
Weight kg. 400
Length mm 1000
Width mm 750
Height mm 1400