18
Figure 8 shows the use of "Leg-
In Bending Guide Rolls” These guide rolls are special accessory for
bending leg-in (angle) material and are available for extra cost. They are adjustable for any size of
material and easy to use, Special rolls are recommended for any batch jobs of leg-in or leg-out
material. Some of the angle materials can be bent with standard rolls.
Operational hints
•
Always clean the rolls and the material of dust, dirt and grease for bending
•
If you are bending a pipe do not rotate the pipe while bending
•
We advise you to fill the profiles or pipes with sand or any similar material if they have a wall thick-
ness of less than 2 mm
•
Do not overload the machine and use special rolls for profiles as well as pipes
•
Operate safely keeping in mind the third party people around the machine
•
Leave enough workspace around the machine
•
The machine can also work horizontally for extremely large diameters
•
The machine has double-speed motor.
Summary of Contents for PV 35
