Scanreco RC400, Instruction Manual

Page: 37 / 40

Document type Document number Rev Page
Manual 66024 C 36 of 37
7 Programming parameters and settings
7.1 General description
The Scanreco RC 400 offers considerable possibilities for system constructors of
hydraulically driven mobile cranes and machines. The program in the control system
is very comprehensive, flexible and has many adaptation possibilities for specific
applications. The control system offers simple programming of a number of functions
which can easily be turned on or off or altered during operation.
To obtain the best manoeuvre characteristics in the simplest way, all programming /
calibration of manoeuvre characteristics is made during operation (so called on-line).
All programming / calibration are made from the portable control unit. Programming
is simple and does not require tools / instruments.
The control system is furnished with and prepared for 2-way (duplex)
communications and for signal handling of functions such as ramp, parallel, lock,
"dead-man's", hold, double and overload / lift reduction etc.
The levels of authorisation are divided into four main groups:
•
Authorisation level 1 (Installer)
•
Authorisation level 2 (Well trained installer, well trained service personnel)
•
Authorisation level 3 (Well trained crane and valve manufacturer, well trained
system constructor)
•
Authorisation level 4 (Scanreco AB, Sweden).
36/37