Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
10.7.13. Protocol: Panasonic KX-TD TCP/IP [port 2300]
Connects to the Panasonic KX-TD series over TCP/IP.
You should program the ip.buffer in the following way:
Source type = TCP
Connect = “ipbuffer to Device (active/client)”
Address = IP address of the Panasonic
TCP Port = 2300 (this is the TCP port the Panasonic listens on)
Protocol Parameters
Password
The password for needed for connecting to the Panasonic KX-TD.
[PCCSMDR]
10.7.14. Protocol: Philips FDCR TCP/IP [port 2599]
Connects to the Philips Sopho iS3000 etc over TCP/IP.
You should program the ip.buffer in the following way:
Source type = TCP
Connect = “ipbuffer to Device (active/client)”
Address = IP address of the Philips
TCP Port = 2599 (this is the TCP port the Philips listens on)
Protocol Parameters
Format
“
Binary
” - saves the records in pure binary with a two byte
length prefix.
“
ASCII Hex
” – converts the 22-byte binary data into human
readable ASCII hex with a CR/LF at the end. Time
stamping is performed.
“
CSV Lines
” - decodes the data into comma-separated ASCII
Lines.
“
Fixed ASCII Lines (normal)
” - decodes the data into
fixed column ASCII Lines.
[Fixed ASCII Lines]
Page 84
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
10.7.13. Protocol: Panasonic KX-TD TCP/IP [port 2300]
Connects to the Panasonic KX-TD series over TCP/IP.
You should program the ip.buffer in the following way:
Source type = TCP
Connect = “ipbuffer to Device (active/client)”
Address = IP address of the Panasonic
TCP Port = 2300 (this is the TCP port the Panasonic listens on)
Protocol Parameters
Password
The password for needed for connecting to the Panasonic KX-TD.
[PCCSMDR]
10.7.14. Protocol: Philips FDCR TCP/IP [port 2599]
Connects to the Philips Sopho iS3000 etc over TCP/IP.
You should program the ip.buffer in the following way:
Source type = TCP
Connect = “ipbuffer to Device (active/client)”
Address = IP address of the Philips
TCP Port = 2599 (this is the TCP port the Philips listens on)
Protocol Parameters
Format
“
Binary
” - saves the records in pure binary with a two byte
length prefix.
“
ASCII Hex
” – converts the 22-byte binary data into human
readable ASCII hex with a CR/LF at the end. Time
stamping is performed.
“
CSV Lines
” - decodes the data into comma-separated ASCII
Lines.
“
Fixed ASCII Lines (normal)
” - decodes the data into
fixed column ASCII Lines.
[Fixed ASCII Lines]
Page 84
