Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
Domain
Domain – you need to enter a domain name (e.g. “scannex.com”)
that is used for the “HELO”/“EHLO” logon sequence, and
for the domain part of the “from” address. The from
email address for alerts will be boxname@domain, while
for data deliveries it will be
boxname_channelname@domain.
[blank]
Username
Only enter a username if the server requires authentication for
sending emails. Usually required if sending to someone on
a domain other than the server’s domain.
[blank]
Password
(see Username above).
[blank]
Limit
When the SMTP server is used to send data this value, in
kilobytes, will break the emails into sizeable chunks.
[1024]
The recipient (email to) addresses are programmed individually for each
channel and on the email alert setup.
Page 34
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
Domain
Domain – you need to enter a domain name (e.g. “scannex.com”)
that is used for the “HELO”/“EHLO” logon sequence, and
for the domain part of the “from” address. The from
email address for alerts will be boxname@domain, while
for data deliveries it will be
boxname_channelname@domain.
[blank]
Username
Only enter a username if the server requires authentication for
sending emails. Usually required if sending to someone on
a domain other than the server’s domain.
[blank]
Password
(see Username above).
[blank]
Limit
When the SMTP server is used to send data this value, in
kilobytes, will break the emails into sizeable chunks.
[1024]
The recipient (email to) addresses are programmed individually for each
channel and on the email alert setup.
Page 34
