Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
5 . In s ta lla tio n
5.1. Connections
Plug the plug-top Power Supply Unit (PSU) into an AC 100-240V mains outlet
situated near the unit.
Connect the cord from the PSU into the DC power input of the ip.buffer.
o
The green Status (S) LED should flash once a second, indicating the unit is
functioning correctly.
o
The power cable can be retained:
!
Slot the cable into the recessed cable-restraint on the underside of
the ip.1, or,
!
Use a cable-tie on the ip.4
Connect the ip.buffer to a network hub or switch. Make sure you connect the
“LAN” port, and not the “SEbus” connector!
o
The yellow Link (L) LED should light and flash in time with network traffic.
If required, and fitted in the ip.buffer, connect the modem port to the
telephone with an appropriate adapter if needed.
Page 13
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
5 . In s ta lla tio n
5.1. Connections
Plug the plug-top Power Supply Unit (PSU) into an AC 100-240V mains outlet
situated near the unit.
Connect the cord from the PSU into the DC power input of the ip.buffer.
o
The green Status (S) LED should flash once a second, indicating the unit is
functioning correctly.
o
The power cable can be retained:
!
Slot the cable into the recessed cable-restraint on the underside of
the ip.1, or,
!
Use a cable-tie on the ip.4
Connect the ip.buffer to a network hub or switch. Make sure you connect the
“LAN” port, and not the “SEbus” connector!
o
The yellow Link (L) LED should light and flash in time with network traffic.
If required, and fitted in the ip.buffer, connect the modem port to the
telephone with an appropriate adapter if needed.
Page 13