Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
14.1.2. Ad hoc change
http://192.168.0.235/setup/config/adhoc.shtm
The “Ad hoc change” url performs the same function as the “Edit” url, except that the edit
box is already blank. This allows the quick entry of single changes, or special Lua
commands.
Special commands
There are some special commands that can be entered in this edit box. For each of them,
clear the whole box (Ctrl-A and then Del):
prune()
Prune will clear out any unknown configuration settings. It is possible to
save extra settings and information in the Lua config tree. To get back to a
set that the current firmware version recognises (and that alone), use the
prune function.
mem.wipestore(n)
This will instruct the memory storage code to completely erase the
channel’s data. e.g. “mem.wipestore(1)” will erase channel 1 data.
mem.resetflags(n)
Resets the “Lost Old” and “Lost New” counters for the given channel.
14.1.3. Download
http://192.168.0.235/lua/config.txt
This link will download the complete Lua configuration tree – either to the browser, or a
file (if you use the “Save Link As” option in the browser).
Use this to store a backup of all the configuration settings of the box.
See also section 15.1
14.1.4. Upload
http://192.168.0.235/setup/config/load.shtm
This link will allow the programming of the ip.buffer configuration settings by uploading a
file from the PC.
See also section 15.1
Page 116
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
14.1.2. Ad hoc change
http://192.168.0.235/setup/config/adhoc.shtm
The “Ad hoc change” url performs the same function as the “Edit” url, except that the edit
box is already blank. This allows the quick entry of single changes, or special Lua
commands.
Special commands
There are some special commands that can be entered in this edit box. For each of them,
clear the whole box (Ctrl-A and then Del):
prune()
Prune will clear out any unknown configuration settings. It is possible to
save extra settings and information in the Lua config tree. To get back to a
set that the current firmware version recognises (and that alone), use the
prune function.
mem.wipestore(n)
This will instruct the memory storage code to completely erase the
channel’s data. e.g. “mem.wipestore(1)” will erase channel 1 data.
mem.resetflags(n)
Resets the “Lost Old” and “Lost New” counters for the given channel.
14.1.3. Download
http://192.168.0.235/lua/config.txt
This link will download the complete Lua configuration tree – either to the browser, or a
file (if you use the “Save Link As” option in the browser).
Use this to store a backup of all the configuration settings of the box.
See also section 15.1
14.1.4. Upload
http://192.168.0.235/setup/config/load.shtm
This link will allow the programming of the ip.buffer configuration settings by uploading a
file from the PC.
See also section 15.1
Page 116
