SCANMASKIN Scan Combiflex 450, Manual

Page: 75 / 190

75
ENGLISH
www.scanmaskin.com
SCAN COMBIFLEX 450/450NS
7 Warranty
This product from Scanmaskin Sweden AB comes with a twelve month warranty. If the product does
not function satisfactorily during this period, Scanmaskin will return the product to full working order
for normal use which the product is intended for – with no charge for labor or spare parts, according
to the following conditions:
1. The warranty only applies to persons that have legal right to the equipment during the war -
ranty period.
2. The manufacturer’s undertaking is limited to the repair of defective parts or the replacement
of these according to the manufacturer’s assessment. Costs and risks for transport as well as
dismantling and reinstallation of the product / products and other direct or indirect costs, as -
sociated with the repair in question, are not covered by this warranty.
3. Periodic inspections, adjustments, maintenance work and changes are not covered by the
warranty.
4. Scanmaskin is not liable for any damages to grinding discs or other similar equipment.
5. The warranty only applies to material and design deficiencies and does not apply in the fol -
lowing cases:
a. Damage caused through accidents, carelessness, changes, use of spare parts or grind -
ing tools that are not original components, or incorrect use and installation.
b. Damage caused by lightning, water, fire, vandalism, incorrect mains voltage, incorrect
ventilation or other causes that lie outside of the manufacturer’s control.
6. Scanmaskin reserves the right to modify the design – or make improvements without obliga -
tion to change previously manufactured products.
7. All warranty repairs must be carried out by Scanmaskin or by a Scanmaskin authorized repair
workshop. Costs for repairs, carried out by an unauthorized workshop, will not be reimbursed
by Scanmaskin. If such repairs damage this product these are not cover by the warranty agree -
ment.