SCANMASKIN Scan Combiflex 450, Manual

Page: 42 / 190

42
www.scanmaskin.com
1 Specifications
The SC-450 is available with different power inputs. This is described in the different sections lat -
er on in this chapter.
1.1 Electrical specifications
To find the specifications that apply to your machine, check the information plate on the ma -
chine.
Never connect the SC-450 to any other voltage or number of phases than de -
scribed in this specification.
The power source must be fused according to “External fuse” in this specification;
also the cables used must be marked and rated in accordance with the fuse used.
Failure to comply with the correct fuses may cause fire or injuries.
Power choice
1
230 V 1~
2
230 V NS 110 V 1~
Power 1.5 kW (2 hp) 2.2 kW (3 hp) 1.5 kW (2 hp)
Current 8.7 A 12.9 A 18.5 A
Voltage 200 – 240 V 1~ 200 – 240 V 1~ 100 – 130 V 1~
Frequency 50 Hz +/- 5% 50 Hz +/- 5% 60 Hz +/- 5%
External fuse
3
10 A 13 A 20 A
Power inlet
4
CEE 7/7 – 250V
16A + PE
CEE 7/7 – 250V
16A + PE
NEMA 5-20 –
125V 20A + PE
Table 11 Electrical specifications
All models are CE-marked.
If using a generator see “2.6.2 Using a generator”
1 This refers to different power choices. Note that a SC-450 made for one choice of power must be used
with the particular choice.
2
Standard
3
Maximum current for the fuses used in the power source (i.e. th e distribution box).
4 This is the standard inlet used. Machines sold outside of EU will be shipped either with a local standar
d
inlet or an adapter.