SCANMASKIN Scan Combiflex 450, Manual

Page: 55 / 190

55
ENGLISH
www.scanmaskin.com
SCAN COMBIFLEX 450/450NS
3 Transportation
3.1 Safety precautions
Read “2.9 Safety regarding transport” before attempting to transport the machine.
3.2 Manual transportation

Detach the tools according to the instructions in “4.14 Changing tools”.

Tilt the machine backwards.

Push the machine in desired direction.
3.3 Lifting
Before attempting to lift the machine, read “2.9.2 Lifting”

Detach the tools according to the instructions in “4.14 Changing tools”.

Fasten the straps used for lifting at the two handles as shown in “ Lifting points SC 450
Figure 32”.

Lift the machine.
Figure 31 Lifting points SC 450 Figure 32 Lifting points SC 450 NS
3.4 Separation of machine
If the machine needs to be transported in a limited space it can be separated into two parts.
On each side of the grinding head / motor assembly there is two pins, each fastened by a lock -
ing clip. To separate the machine, disconnect the motor cable; remove the locking clips and the
pins. Take extra care to prevent the frame from falling backwards.