30
CD mode
You can use the CD drive to play standard audio CDs and writable discs (CD-Rs,
CD-RWs) with a diameter of 12 cm. To ensure the device functions properly, you
should not burn CDs of speeds greater than 16x.
Caution!
Risk of severe damage to the CD player!
Do not use 8 mm CDs (Mini CDs) or contoured CDs (Shape CDs).
Handle the CD carefully and avoid scratching or otherwise damaging it.
Only handle CDs on the edges whenever possible. To clean dirty CDs, use a
lint-free cloth without solvent. Always wipe CDs from the centre outwards.
Keep CDs out of direct sunlight and store in a case/sleeve when not in use.
Do not affix any labels to CDs. Use a suitable felt pen to write on CDs.
Scania does not accept responsibility for damage to the CD player caused by
unsuitable or damaged CDs.
For optimal performance, only use CDs with the Compact Disc logo.
Copy-protected CDs may not play correctly. Scania cannot guarantee that the device
will function properly when playing copy-protected CDs!
Note
If the ambient Radio Medium temperature exceeds 70 degrees Celsius, some of the
Radio Medium functions will switch off. "OVERTEMP" and "CDOFF" will be shown in
the display. When the temperature falls below 70 degrees Celsius, you can resume
using the CD player and other functions as usual.
Starting CD mode
If there is no CD inserted in the drive:
insert a CD (printed side up) in the drive and press it into the
CD compartment until you feel some resistance.
The CD will automatically be pulled into the drive. The CD symbol will appear in the
display (5).
Note
Do not touch the Radio Medium whilst it draws in the CD.
The CD will begin to play. The number and playing time of the first track ("T01") will
be shown in the display (5).
If there is already a CD in the player,
press the
SRC
button (12) (may need to press several times) until "CD" appears
in the display (5).
Playback will begin from the point at which it was last interrupted.
Selecting a track
Press button or (7) to select previous or next track.
