Scania Radio Medium, Manual

Page: 16 / 42

16
If your phone has previously been connected and is automatically connected, the
Bluetooth symbol is displayed permanently in the radio display. If the radio does not
find a mobile phone, the symbol goes out.
The Bluetooth function is active until you deactivate it. If you switch off the radio with
the Bluetooth function activated and switch it on again after a while, the function will
still be active. The radio automatically tries to establish a connection with one of the
last five mobile phones that were connected.
You can activate the radio Bluetooth and connect the phone without the power on.
When the power is switched on, the call list and phone book are transferred to the
instrument cluster.
3. Connect the phone to the radio
Connecting the phone means that the radio actively searches for an activated
Bluetooth-enabled phone. You can also confirm in your phone that you want to
connect it to the radio. You can connect one phone at a time.
Proceed as follows to connect a phone:
1. Press the radio MENU (6) button.
2. Use the radio rocker button and scroll to BT PAIR. VISIBLE then appears on
the display.
The radio now searches for the phone. A connection is displayed in the mobile phone
called SCANIA BT. Select this.
3. A code is shown in the radio display which should be entered in your phone’s
button kit. Follow the phone’s instructions.
The radio now connects the phone and when the connection is verified, PAIRED is
briefly displayed in the radio display. The radio’s Bluetooth symbol then flashes
rapidly and is permanently visible when the connection is established.
When the phone is connected, an earpiece is displayed in the centre of the main
menu of the display. Press the centre button of the INFO button to go directly to the
phone menu.
If connection of the phone fails: start up the phone after carrying out the steps in the
section 3. Connect a mobile phone and search for the radio Bluetooth connection
from your mobile phone.
The radio’s Bluetooth symbol flashes
when the radio is searching. When a
connection is established, the