20
bleaching or decontaminating products.
: washing additive, such as fabric softener or tackifier.
Put detergent into washing machine.
1 Pull out the drawer.
2 Fill pre-detergent into Case I (when necessary).
3 Fill detergent into Case II.
4 Fill softener into Case (when necessary).
Notes:
As for the agglomerated or ropy detergent or additive, before
they are poured into the detergent box, it is suggested to use
some water for dilution to prevent the inlet of detergent box
from being blocked and overflowing while filling water.
Start up washing machine
Connect the power. Check if water pipes are connected properly.
Open the tap completely.
Put in the clothes to be washed and fill in the detergent and
tackifier. Then press the button “Power”, Select the proper proce-
dures and functions and press the button “Start/Pause”.
Select the procedure
The proper washing procedures shall be selected according to
the types, quantities, and dirtiness of the clothes to be washed
in combination with the following washing temperature table.
90°C
Seriously besmirched, pure white cotton or flax
(for example: coffee table cloths, canteen ta-
ble cloths, towels, bed sheets)
60°C
Moderately besmirched, colorful flax, cotton
and synthetic articles with certain decolori-
zing degree (for example: shirts, night paja-
mas; Slightly besmirched, pure white flax (for
example: underwear)
40, 30, 20°C
Cold water
Normally besmirched articles (including
synthetic and wool)
First, turn the rotary switch to select the corresponding procedu-
res according to the types of textiles.
Second, select the proper temperature according to the dirtiness.
Generally, the higher the temperature is, the more the power is
consumed.
Last, select the proper revolution speed. The higher the revo-
lution speed is, the drier the textiles are spun, but higher the
noises will also be increased.
The surfaces of delicate textiles will have wrinkles and the work-
ing life of washing machine will be shortened.
PLEASE NOTE:
to protect the clothes, the lower revolution speed shall be se-
lected for delicate textiles. The main washing procedures depend
on the types of the clothes to be washed. The main washing
troubles can be selected as follows:
- Cotton
You can select this procedure to wash the daily washable clothes.
The washing period is quite long with quite strong washing in-
tensions. It is recommended to wash the daily
cotton articles, for example: bed sheets, quilt covers, pillowcases,
gowns, underwear etc.
- Synthetic
You can select this procedure to wash the quite delicate clothes.
The procedure is shorter compared with that for cottons and the
washing intension is quite gentle. It is recommended to wash
synthetic articles, for example: shirts, coats, blending. As for
curtains and laced textiles, the procedure “Synthetic ” shall be
selected. While washing the knitting textiles, detergent quantity
shall be reduced due to its loose string construction and easily
forming bubbles.
- Wool
You can select this procedure to wash the wool textiles labeled
with “Machine Wash”.
Please select the proper washing temperature according to the
label on the articles to be washed. Furthermore, the proper de-
tergent shall be selected for wool textiles.
- Underwear
Underwear cycle which is specially made for washing under-
wears is more demanding on rinsing strength and will operate
one more time than other cycles.
- Quick
This procedure is suitable for washing few and not very dirty
clothes quickly.
- Cotton Intensive
To increase the washing effects, main additional washing time
is increased.
It is recommended to wash the clothes for babies or worn by the
persons with allergic skin.
- Spin
Separate Spin Procedure. Soap water or rinse water shall be
drained out before spinning.
- Drum Clean
This cycle is specially set in this machine to clean the drum and
tube. It applys 90 °C high temperature sterilization to make the
clothes washing more green. When this procedure is performed,
the clothes or other washing cannot be added. When proper
amount of chlorine bleaching agent is put in, the barrel cleaning
effect will be better. The customer can use this procedure regu-
larly according to the need.
- Bubble Removal Function
Bubble Check Function: Redundant bubbles will occur when there
is excessive detergent, which will affect Wash and Rinse effects.
The procedure will check automatically and one bubble removal
procedure will be added automatically to remove bubbles when
excessive bubbles are checked. It will also remind the user to use
less detergent during the next similar washes.
- Suppression of the acoustic signals
This is an additional buzzer function on your appliance. After
deactivating the buzzer function, the buzzer will be closed. After
starting the machine, press the “Temp.” button for 3 seconds and
