Installation
The following instructions should be read by a qualified technician to
ensure that the appliance is installed, regulated and technically serviced
correctly in compliance with current regulations.
Important: disconnect the cooker from the electricity when making any
adjustment, maintenance operation, etc.
Positioning
The appliance can be installed next to furniture units which are no taller
than the top of the cooker hob. For proper installation of the cooker, the
following precautions must be taken:
Kitchen cabinets installed next to the cooker that are taller than the top
of the hob must be situated at least 20 cm from the edge of the hob.
Hoods must be installed according to the requirements in the installa-
tion manual for the hoods themselves and in any case at a minimum
distance of 65 cm.
Place the wall cabinets adjacent to the hood at a minimum height of 42
cm from the hob (see figure).
Should the cooker be installed beneath a wall cabinet, the latter should
be situated at least 70 cm (centimeters) away from the hob, as shown in
the figure.
The cut-out for the cooker cabinet should have the dimensions indicated
in the figure below.
Product Dimensions:
Height: ................................................................................
Width: .......................................................................................... 598 mm
Depth: .......................................................................................... 595 mm
Product specifications:
• 4 zone solid hot plates:
• 2 x 1.50 kW solid hot plates (Ø 160mm)
• 2 x 2.00 kW solid hot plates (Ø 180 mm)
• Oven energy efficiency class: A
• Oven gross / net capacity:
litres
• 9 Oven functions
• Mechanically controllable thermostat
• Double-glazed full inner door glass
• Wipe-clean enamel cavity
• Storage compartment
• Adjustable feet
835-865
1040
598
595
Min.60
cm.
Min.
42
cm.
Min.
42
cm.
Cooker
Hood
Min.65
cm
.(With
Hood)
Min. 70 cm. (Without Hood)
EN-4
835-865mm
70(65)
