Scaime IPB 50, Instruction Manual

Page: 8 / 28

IPB50
7
USER SET-UP “SEt”
If the user wishes to program any of these specific parameters, he must first enter into USER SET-UP by
keeping
↵
pressed while turning the instrument on (pressing the ON key) until the display indicates "SEt."
The functions of the following keys, under USER SET-UP, allow the user to:
->0<- Scan the programming steps.
↵
to enter the selected step and to store all values previously modified (has 2 functions).
->T<- Scan the possible values of the parameters (in modifying)
Step Display shows What the symbol indicates
MoDE
Std Weight indicator with kg / lb conversion activated
ntgS Weight indicator with Net /Gross conversion Fn.
UISS Weight indicator
HLd Weight ind HOLD function (holds last measured weight)
PIC Weight ind
PEAK
detection function
(shows highest recorded weight)
tot 0 Weight ind “totalizer” function
accumulation
tot S Weight ind totalizer batch
COUn Weight ind counting function.
StPG Weight ind setpoint for gross weight
StPn1
Weight ind setpoint for net weight only positif
StPn2 Weight ind setpoint for net weight only negatif
StPn3 Weight ind setpoint for net absolute weight
If StPG or StPn is selected
CrL1 r 1 nO first relay normally open
r 1 nC first relay normally closed
CrL2 r 2 nO second relay normally opened
r 2 nC second relay normally closed
IstEr IstnO
setpoint without hysteresis
IstSI setpoint with hysteresis