IPB50
4
POWER SUPPLY & START UP
The IPB50 is normally charged with a 12 to 25 Vdc ( 7W max.) tension supplied from an AC/DC external
charger (supplied) which should be connected to the 230 Vac mains voltage. Safety norms must be respected
for the connection to the main voltage including the use of a line, which has to be free from noise generated by
other electronic equipment.
Do not connect other devices to the same outlet.
Don not step or squash the mains cable.
The instrument will first show a random number, then the code –X- Y.ZZ; where X indicates the keyboard type.
X=0 means 4 key keyboard and Y.ZZ indicates the installed software version. Then, capacity and minimum
division are shown. The instrument will perform an auto-test and warm up routine.
After few seconds the instrument will indicate ZERO, if the platform has been correctly installed and
connected, and everything is ready to start a weigh procedure.
Possible messages :
_ _ _ _ _ _
over max capacité
_ _ _ _ _ _ the weigh is under the memorized zero
Summary of Contents for IPB 50
Page 4: ...IPB50 3 SPECIFICATIONS ...
