background image

LIMITED WARRANTY- COMMERCIAL ACCESSORY

Any part of the Scag commercial accessory manufactured by Scag and found, in the reasonable judgment of 

Scag, to be defective in material or workmanship, will be repaired or replaced by an Authorized Scag Service 

Dealer without charge for parts and labor.

The Scag accessory,  including any defective part, must be returned to an Authorized Scag Service Dealer 

within the warranty period.  The expense of delivering the accessory to the dealer for warranty work and the 

expense of returning it back to the owner after repair or replacement will be paid for by the owner.  Scag’s 

responsibility in respect to claims is limited to making the required repairs or replacements, and no claim of 

breach of warranty shall be cause for cancellation or rescission of the contract of sale of any Scag machine.  

Proof of purchase will be required by the dealer to substantiate any warranty claim.  All warranty work must be 

performed by an Authorized Scag Service Dealer.

This warranty is limited to 90 days from the date of original retail purchase for any Scag accessory that is used 

for commercial purposes, or any other income-producing purpose including rental use.

The warranty for the grass catcher blower assemblies (excluding the belt) is limited to 1-year from the date of 

original retail purchase. 90 Days for rental use.

This warranty does not cover any accessory that has been subject to misuse, neglect, negligence, or accident, 

or that has been operated in any way contrary to the operating instructions as specified in the Operator's Manual.  

The  warranty does not apply to any damage to the accessory that is the result of improper maintenance, or to 

any accessory or parts that have not been assembled or installed as specified in the Operator's Manual.  

The warranty does not cover any accessory that has been altered or modified.  In addition, the warranty does 

not  extend to repairs made necessary by normal wear, or by the use of parts or accessories which, in the 

reasonable judgment of Scag, are either incompatible with the Scag mower or adversely affect its operation, 

performance or durability.  This warranty does not cover engines and electric starters, which are warranted 

separately by their manufacturer.

Scag Power Equipment reserves the right to change or improve the design of any accessory without assuming 

any obligation to modify any accessory previously manufactured.

All other implied warranties are limited in duration to the 90 day warranty period. Accordingly, any such implied 

warranties including merchantability, fitness for a particular purpose, or otherwise, are disclaimed in their 

entirety after the expiration of the appropriate ninety day  warranty period.  Scag’s obligation under this warranty 

is strictly and exclusively limited to the repair or replacement of defective parts and Scag does not assume or 

authorize anyone to assume for them any other obligation.  Some states do not allow limitations on how long an 

implied warranty lasts, so the above limitation may not apply to you.

Scag assumes no responsibility for incidental, consequential or other damages including, but not limited to, 

expense for gasoline, oil, expense of delivering the machine to an Authorized Scag Service Dealer and expense 

of returning it back to the owner, mechanic’s travel time, telephone or telegram charges, rental of a like product 

during the time warranty repairs are being performed, travel, loss or damage to personal property, loss of 

revenue, loss of use of the mower, loss of time, or inconvenience.  Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to 

state.

Summary of Contents for GC-2B


























Reviews: