5
R
Section 2
3. Install the left and right side upright mounting
tubes to the grass catcher hood assembly. Secure
using (4) 3/8-16 x 2-1/4" hex head bolts and (4)
3/8-16 elastic stop nuts. See Figure 2-11.
3/8-16 ELASTIC
STOP NUT
3/8-16 x 2-1/4”
MOUNTING TABS
TOWARD THE CENTER
OF THE MACHINE
Figure 2-11. Up Tube Installation
4. Install the adapter to the hose and secure with (1)
6-1/2" clamp included with this grass catcher. See
Figure 2-12.
SNAP PIN
SNAP PIN
Figure 2-13. SPZ Assembly Installation
6-1/2” CLAMP
ADAPTER
HOSE
Figure 2-12. Hose to Adapter Installation
5. With help from an assistant, install the grass catcher
hood assembly onto the grass catcher mounting
brackets installed on the machine in Step 1. See
Figure 2-13. Secure with the (2) snap pins included
with this grass catcher.
